Do you remove skimmer basket while vacuuming pool? By the time you read this article you will have your answer. Vacuuming a pool is essential when the amount of debris in your pool is too much to be removed by brushing or an automatic cleaning system. Before the debris becomes attached to the pool surface, the pool should be vacuumed to clear out the dirt.
Do You Remove Skimmer Basket While Vacuuming Pool
If you have pool problems, a common solution is cleaning your pool with a vacuum. Manual pool vacuum systems that work for almost any pool are available at any pool supply store. It is made up of three major components which are:
- A flexible vacuum hose.
- A vacuum head.
- A long telescopic pole.
A swimming pool can be high ground or low ground, and each has different techniques for cleaning them. Let us take a quick look at the different ways of vacuuming pools. Remember, there are various pool cleaning supplies you can own as well and always take into consideration the pool system your pool currently has.
How to Vacuum Above-Ground Pool
Pool experts say to vacuum an in-ground pool you need to first of all have a manual vacuum cleaner, and get it set up. After setting the vacuum cleaner, you need to follow the following process.
- Use a leaf rake or skimmer basket to remove every form of debris from the surface of the pool.
- The vacuum head and the swivel end of the vacuum hose should be attached. Attach the head to the extension pole, and lower it into the pool until the vacuum head reaches the bottom of the pool. Then lock the pole into position and lean it against the side of the pool with easy reach of the water return outlet.
- Fill the hose with water by holding the free end of the vacuum hose in front of the water-return outlet.
- With the hose head still submerged in the pool, slowly pull it away from the water-return outlet and attach the skimmer disk.
- Stand in a position where you can clearly see the bottom of the pool. Then slowly move the vacuum head back and forth over the bottom of the pool until the bottom is completely clean.
How to Vacuum an In-Ground Pool
The process of vacuuming an in-ground pool is almost the same as that of an above ground pool. You only need to get a moderate-sized equipment which can vacuum your pool. You can as well get automatic vacuum cleaners for an in-ground pool.
Questions & Answers
1. Can you vacuum algae out of pool?
Answer: The easiest way to eliminate the algae that has settled at the bottom of your pool is to bypass the filter and vacuum from the pool to waste.
Hopefully, you have a multi-port system that can vacuum your pool to waste, or your pool installer plumbed in a waste line on your system in front of your cartridge filter.
2. What setting should pool filter be on while vacuuming?
Answer: For routine vacuuming, the filter valve is left in the normal “filter” position. This directs dirty vacuum water through the pool filter to remove the contaminants, then conveys filtered water through return lines back to the pool. The “filter” setting is used for light to moderate levels of pool sediment.
Swimming pools are a great addition to any home. Hopefully this article has helped you decide the answer to “do you remove skimmer basket while vacuuming pool?” Essentially, you can leave your skimmer basket in the pool while vacuuming, but you may find that it can get in the way. Therefore, when cleaning your pool, it may be best to remove the skimmer so that way the debris and dirt can be removed from the pool entirely.
