A swimming pool is surely a great addition to your house or your commercial space, but it is important to keep the water clean and free from pathogens. Sanitation is the ultimate key to get the most enjoyment out of your swimming pool. You need to add the right amount of chlorine to keep the pool healthy and perfect to swim in. However, it is very tough to balance the right amount of chlorine to use. You need to maintain the proper chlorine level in pool to keep it free from algae and germs. There are a lot of organic materials that tend to build up in the pool and chlorine can easily destroy them. This article will go in depth over the proper chlorine levels in pool to use.
Proper Chlorine Level in Pool
The proper chlorine level in pool should be anywhere between 1.0-3.0 ppm and should have the pH level anywhere from 7.2 to 7.6.
What is the Right Amount of Chlorine?
You must make sure that chlorine is properly used in the swimming pool so that you can shock the water that has a huge amount of bacteria and organic matter in it. For shocking a pool full of algae, chlorine is much needed. The pH level of the water must be kept in check. If the pH level increases too high, then even the right amount of chlorine will also not make the water safe for swimming. Chlorine can lose its effectiveness in water which is too acidic. You need to maintain the pH level similar to that of the human tears which is about 7.2 to 7.6.
No matter how frequently or what system you are using, you need to add chlorine to the water. But the chlorine level must stay between 1.0 and 3.0 ppm (parts per million). This will help to maintain a healthy pool. If the chlorine content of the water is higher than this then there are many disadvantages. Higher level of chlorine comes with disadvantages like itchiness, dry skin and red eyes.
Calculation for Chlorine
Calculating the amount of chlorine you will need for the swimming pool requires a bit of mathematics. The hardest part of this is to determine the total amount of water you have in the pool. Don’t worry as there are some pool supply houses that provide you with calculators to help you determine the gallons of water you have in the pool and what temperature your pool should be when putting in chlorine. Once you know the total volume, you need to apply a simple formula. One ounce of the chlorine will give about 1 ppm in the 75,000 gallons of water. This means you have to add 0.013 ounces for 100 gallons.
Bottom Line
So, now you know the proper chlorine level in pool that you need. Chlorine has a lot of benefits and you can surely kill a lot of germs, algae and other harmful organic matter in your pool. But make sure to use the chlorine in the right amount. Otherwise, it can be quite harmful for your health. You will definitely not want a higher level of chlorine since that can cause dry skin, itchiness and red eyes. So, make sure you are using the right amount of chlorine in your swimming pool according to the measurements given above and maintain your pool properly.
